Inhoudsopgave
Advertenties
82. Add Until
Add a Until tool
contact to a robot
program
Detail
I/O Input
Gebruikershandleiding
1. When you have added the Until command, tap the
The default speed of motion is too high for contact detection.
A faster speed of motion triggers a robot stop, before the
Tool Contact condition can take effect. To avoid triggering a
robot stop, lower the speed of motion. For example: 100m/s.
Until Tool Contact might not work if the mounted tool
vibrates. For example: a vaccuum gripper with an embedded
pump can introduce fast vibrations.
Use the Retract to Contact setting for the robot to return to the initial point
of contact. You can set an additional reverse movement to make the robot
move free of, or toward, contact. This is useful if you have a gripper that
needs free space to move, or if a clamping action is needed.
This node uses an I/O input to stop a signal controlled motion.
You can also use an an I/O input to specify a stop condition.
LET OP
MEDEDELING
257
UR20
Advertenties
Inhoudsopgave
