Table - Universal Robots e Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor e Series:
- Gebruikershandleiding (205 pagina's) ,
- Gebruikershandleiding (231 pagina's) ,
- Gebruikershandleiding (281 pagina's)
Inhoudsopgave
Advertenties
Safety
Description
Function
Mode switch
When the external connections are Low,
INPUT
Operation Mode (running/ automatic operation
in automatic mode) is in effect. When High,
mode is programming/ teach.
Recommendation: Use with a 3-position
enabling device. When in teach/program,
initially the TCP speed will be limited to
250mm/s. The speed can manually be
increased by using the pendant user interface
"speed-slider", but upon activation of the
enabling device, the speed limitation will reset
to 250mm/s.
17.3. Table 2
UR e-Series robots comply with ISO 10218-1:2011 and the applicable portions of ISO/TS 15066. It
is important to note that most of ISO/TS 15066 is directed towards the integrator and not the robot
manufacturer. ISO 10218-1:2011, clause 5.10 collaborative operation details 4 collaborative
operation techniques as explained below. It is very important to understand that collaborative
operation is of the APPLICATION when in AUTOMATIC mode.
#
ISO 10218-1
1
Collaborative
Operation 2011
edition, clause
5.10.2
UR16e
Technique
Safety-rated
Stop condition where position is
monitored
held at a standstill and is
stop
monitored as a safety function.
Category 2 stop is permitted to
auto reset. In the case of
resetting and restarting
operation after a safety -rated
monitored stop, see ISO 10218-
2 and ISO/TS 15066 as
resumption shall not cause
hazardous conditions.
PFH
Less than 1.8E-07
Input to SF2
Explanation
106
17. Veiligheidsfunctietabellen
Affects
D
Robot
UR e-Series
UR robots' safeguard
stop is a safety-rated
monitored stop, See
SF2 on page 1. It is
likely, in the future, that
"safety-rated monitored
stop" will not be called a
form of collaborative
operation.
Gebruikershandleiding
Advertenties
Inhoudsopgave
