Advertenties
Fault
Too close to the
station
Toppled
Wheel fault
STOP button error
Anl_FREELEXO_CAM_PLUS_SPK13.indb 60
Anl_FREELEXO_CAM_PLUS_SPK13.indb 60
GB
Possible cause
- The robot lawn mower was
sent back too close to the
charging station (19).
- The robot lawn mower was
constantly tilted for 10 se-
conds
- The robot lawn mower has
been tilted for a long time in
one direction
- The rear wheels (8) were
lifted by an obstacle
- The rear wheels (8) can rota-
te freely due to unevenness
in the lawn
The display cover (13) is open
but the STOP button (3) was
not activated
- 60 -
Remedy
Press the STOP button (3) in order to open
the display cover (13). Re-start the mowing
operation on the control panel (2):
- The robot lawn mower should be sent
back to the charging station (19) at a mini-
mum distance of 2 m.
Press the STOP button (3) in order to open
the display cover (13). Re-start the mowing
operation on the control panel (2):
- Move the robot lawn mower to a level area
and restart it.
- If the robot lawn mower is tilted because
of a steep slope in the mowing area, use
the supplied magnetic tape (27) to make
the lawn mower keep away from this point
and therefore avoid severe inclines.
Press the STOP button (3) in order to open
the display cover (23). Re-start the mowing
operation on the control panel (2):
- Move the robot lawn mower to a level area
and restart
Press the STOP button (3) in order to open
the display cover (13). Re-start the mowing
operation via the control panel (2):
- Check if the display cover (13) can be
freely opened and closed with the STOP
button (3).
- Check the functionality of the STOP but-
ton (3).
04.10.2024 10:05:51
04.10.2024 10:05:51
Advertenties
