Advertenties
freely.
Perform a general inspection of the robot lawn
mower at regular intervals and remove any depo-
sits which have accumulated. At the start of each
season, ensure that you check the condition of
the blades (10). If repairs are necessary, please
contact our customer service center. Use only
genuine spare parts.
7.2.2 Software update
If you want to update the software, copy the new
software to an empty USB stick (format the USB
stick fi rst if necessary). Make sure that the battery
is fully charged before you carry out the following
steps.
1. Place the robot lawn mower in the area to be
mowed. The robot lawn mower must not be in
the charging station during the software up-
date.
2. Connect a USB stick to the USB connection
as shown (Fig. 11).
3. The robot lawn mower will now start updating
the software and will display the current sta-
tus.
4. When the update process is completed, pull
out the USB stick and restart the robot lawn
mower with the main switch (7).
Alternatively you can also carry out the software
update via the Einhell Connect app. Select "Set-
tings" and then "Firmware Update" in the app, after
which you will receive further instructions from the
app.
7.2.3 Repairing the guide cable
First disconnect the charging station (19) from
the power supply. If the guide cable (24) has
been severed at any point, use the supplied cable
connectors (25) to repair it. To do so, insert both
ends of the severed guide cable (24) into the
cable connector (25) and squeeze it with the help
of a pair of pliers. Connect the power plug to the
socket outlet. Finally, check the LED display (19a)
on the charging station (19) to see if the function
is working.
Anl_FREELEXO_CAM_PLUS_SPK13.indb 56
Anl_FREELEXO_CAM_PLUS_SPK13.indb 56
GB
7.3 Ordering spare parts
Please provide the following information on all
orders for spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For the latest prices and information go to www.
Einhell-Service.com
Replacement blades Art. No.: 34.140.20
8. Storage
Fully charge the battery (A) before putting it into
storage over winter and switch off the robot lawn
mower at the main switch (7) (OFF). Take the
battery (A) out of the equipment. Disconnect the
power supply unit (20) from the power supply and
the charging station (19).
The guide cable (24) can be left outdoors over
winter. However, make sure that the connections
are protected against corrosion. To do so, discon-
nect the connections of the guide cable (24) from
the charging station (19).
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30°C. Store the equipment
in its original packaging.
9. Transport
•
Switch off the equipment at the main switch
(7) (OFF) (Fig. 8).
•
Fit transport guards if available.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine against slipping and tip-
ping over.
•
Carry the robot lawn mower by the carry-
handle (6) with the blade plate (11) facing
away from your body.
- 56 -
04.10.2024 10:05:50
04.10.2024 10:05:50
Advertenties
