Advertenties
be stopped immediately and the mower will
reverse away from the obstacle.
•
Camera unit:
The robot lawn mower comes with a camera
unit (15) which analyzes the mowing area
(approx. 1m²) lying ahead of it. The camera
is directed at the ground so that the objects
lying in the screen area appear with a ma-
ximum height of 50 cm. The image material
to be processed is saved only locally and
temporarily on the robot lawn mower and is
continually overwritten. The robot lawn mower
can recognize obstacles and the work area in
which there is no longer any lawn. When the
robot lawn mower comes across an obstacle
or no longer detects any lawn, it will stop and
begin to mow again in a random direction.
Because of the camera unit it is impossible
for the robot lawn mower to work in twilight or
during the night. The selected work window
should lie within daytime hours when there is
enough daylight for the robot lawn mower to
work reliably. This also helps to protect semi-
nocturnal animals such as hedgehogs.
•
Distance sensors:
The robot lawn mower is equipped with dis-
tance sensors (16) which enable it to detect
obstacles along its path. When the robot lawn
mower comes across an obstacle, it will stop
and begin to mow again in a random direc-
tion.
•
Magnetic tape sensor
The robot lawn mower (29) is equipped with a
magnetic tape sensor for recognizing a mag-
netic tape (27) lying on the ground. When the
robot lawn mower comes across a magnetic
tape it will stop and begin to mow again in a
random direction. The magnetic tape serves
as a virtual boundary for creating areas of the
garden where the robot lawn mower is not
allowed to mow.
•
Rain sensor:
The robot lawn mower is equipped with a
rain sensor (5) to prevent it from operating in
the rain. When the robot lawn mower detects
rain it will return to the charging station (19)
and be completely recharged there. Once the
rain sensor (5) is dry again, the robot lawn
mower will stay in the charging station (19)
for the preselected delay time. Only then will
it begin working again, provided it is still in an
active time window. If the rain sensor (5) has
been activated (this is recommended in or-
der to exert less stress on the lawn), you will
see a bright cloud in the display (50). If the
Anl_FREELEXO_CAM_PLUS_SPK13.indb 43
Anl_FREELEXO_CAM_PLUS_SPK13.indb 43
GB
sensor triggers, a dark cloud with rain drops
will appear. Do not short-circuit the two metal
sensors with metal or any other conductive
material. This will impede the correct operati-
on of the robot lawn mower.
•
GNSS module
The robot lawn mower determines its position
and the position of the charging station (19)
by means of a global navigation satellite sys-
tem (GNSS). This helps the robot lawn mower
to find its way back to the charging station
(19).
The robot lawn mower can use the GNSS
module to determine the local times for sun-
rise and sunset so that it is prevented from
mowing in twilight and during the night. This
also means that the robot lawn mower can
work reliably with its camera unit (15).
The robot lawn mower also uses the GNSS
module at all times to determine its distance
from the charging station (19). The robot lawn
mower is allowed to move no more than 1000
m from the charging station (19) or else a fault
message will appear on the display and the
robot lawn mower cannot be operated in Main
Area mode. The mower's distance from the
charging station (19) is irrelevant for operation
in Secondary Area mode.
•
Wi-Fi:
The robot lawn mower is equipped with a Blu-
etooth WLAN module. The status and signal
strength of the WLAN are indicated accordin-
gly on the display.
5.3 Preparations
If the grass is taller than 60 mm it has to be
shortened fi rst to avoid exposing the robot lawn
mower to excessive load and adversely aff ecting
its operating effi ciency. Use a conventional lawn
mower or trimmer to do this. Remove all loose
objects from the lawn which could get damaged
by the robot lawn mower or cause damage to the
robot lawn mower itself.
Check the mowing area, the lawn boundary and
any areas that you don't want to be mowed. The
following sections of these operating instructions
contain information about how you can defi ne
precise lawn boundaries and protect specifi c are-
as. Some obstacles can be detected by the robot
lawn mower in good time and require no elabora-
te protection.
Have the following tools ready: A hammer, tongs,
a wire stripper and a spirit level (optional).
- 43 -
04.10.2024 10:05:46
04.10.2024 10:05:46
Advertenties
