Advertenties
11. Charging station display and troubleshooting
LED display (19a)
Off
Lit green
Flashing green
Lit red
Flashing red
12. Robot lawn mower display and troubleshooting
Fault message from the robot lawn mower in the LCD (50)
Fault
No signal
Outside
Battery fault
Anl_FREELEXO_CAM_PLUS_SPK13.indb 58
Anl_FREELEXO_CAM_PLUS_SPK13.indb 58
GB
Description
- No power supply
- Ready for mowing
- The battery is fully charged
- The guide cable (24) is con-
nected
- The guide cable (24) is se-
vered
- The battery is being charged
- Fault at the station
Possible cause
- Guide cable (24) is not pro-
perly connected
- No power supply
- The guide cable (24) is se-
vered
- The robot lawn mower
cannot recognize any lawn
area or lawn boundaries and
therefore lies outside the mo-
wing area
- The robot lawn mower has a
battery fault
- The battery cannot be char-
ged
- The battery has reached the
end of its service life
- 58 -
Solution
- Check the power supply
- Examine the guide cable (24) for a break
- Wait until the battery is fully charged
- Check the power cable to the charging
station
Remedy
Check whether the LED indicator (21) on the
charging station (19) is lit up green
- Make sure that the guide cable (24) is laid
correctly and centrally underneath the
charging station (19).
- Check the position of the charging station
(19).
Press the Stop button in order to open the
display cover (13). Re-start the mowing ope-
ration via the control panel.
- Make sure that the robot lawn mower is
in the mowing area, check the position at
which the robot lawn mower has come to
a standstill.
- Make sure that the battery was correctly
fi tted.
- Check whether the main switch (7) is swit-
ched on (ON) while the robot lawn mower
is in the charging station (19).
- Check the position of the charging station
(19). Replace the battery if necessary.
04.10.2024 10:05:50
04.10.2024 10:05:50
Advertenties
