Advertenties
secondary area".
Spot mowing
It might happen that your robot lawn mower fails to
mow some spots suffi ciently. Place the robot lawn
mower on the spot in question and start the mo-
wer. The robot lawn mower will then begin to mow
the lawn in a spiral pattern until it collides with an
obstacle or the camera no longer detects a lawn
area that can be mown. The lawn mower will now
continue to mow until the battery becomes empty,
after which it will return to the charging station.
Back to the charging station
Now send the robot lawn mower back to the char-
ging station (19) as described in section 6.5.4.
Time schedule:
The lawn mower's work window is limited by sun-
rise and sunset. The current values are shown on
the display under the "Schedule" menu.
If the set mowing start time lies before the indica-
ted sunrise time (shown at top left of the display),
the robot lawn mower will not begin to mow until
the indicated sunrise time is reached.
If the set mowing end time lies after the indicated
sunset time (shown at top right of the display),
the robot lawn mower will return to the charging
station at the indicated sunset time and not at the
set time.
Important!
The sunrise time and the sunset time calcu-
lated by the robot lawn mower is presented
with a 30 minute safety margin in order to
ensure fault-free operation.
In this mode you can use the navigation buttons
(55) to set the mowing times per day. You can defi -
ne two mowing windows per day. You can transfer
the defi ned mowing windows to other days or plan
each day individually.
If you set two mowing windows on one day, the
mowing windows are not allowed to overlap. Fur-
thermore, the mowing windows must lie within a
single day. The mowing times are not allowed to
extend from one day into the next.
To remove a set mowing window you must re-
set the mowing window to 00:00-00:00.
As a coarse guideline it is recommended to base
the mowing time setting on 8 hours per day for
500 m². The selected working time must be ad-
apted to take account of the garden's size and
complexity.
Anl_FREELEXO_CAM_PLUS_SPK13.indb 53
Anl_FREELEXO_CAM_PLUS_SPK13.indb 53
GB
6.5.2 Settings – "SET" button
The "SET" button (51) can be used to make the
basic settings on your robot lawn mower. Use
the navigation buttons (55) to move to where you
want to go and then use the "OK" button (56) to
confi rm or the "BACK" button (54) to discard the
settings you have made.
Reversing distance
You can set how far and where the robot lawn
mower travels when it reverses out of the charging
station (19). First the robot lawn mower reverses
over the set distance before it turns into the area
to be mowed. Make sure that the set reversing
distance does not cause the robot lawn mower to
leave the area to be mowed.
Rain sensor
The rain sensor (5) can be programmed using this
setting. The default factory setting for the sensor
is "On". You can activate or deactivate the rain
sensor (5) and set its delay time. The delay time
defi nes how long the robot lawn mower continues
to remain in the charging station (19) after the rain
sensor (5) has dried.
Mower protocol
In this subsection you can view the error memory
and delete the map or delete the limit values or
delete the images.
General information
- PIN code: You can replace the default PIN for
the robot lawn mower with your own choice of
PIN. To do so, proceed as described in the chap-
ter "Locking mechanism / PIN". Important! Make a
note of the new PIN.
- Date & time: Use the navigation buttons (55) to
go to the point that you want to change and make
the settings accordingly.
- Language: Using the navigation buttons (55),
go to the language that you require.
- Software version: The current version of the
robot lawn mower software is noted here.
App link
In this subsection you can set up the Wi-Fi con-
nection for the robot lawn mower with the help of
your smartphone. Furthermore you can reset the
Wi-Fi connection and obtain information about the
Wi-Fi connection.
- 53 -
04.10.2024 10:05:49
04.10.2024 10:05:49
Advertenties
