Advertenties
2. Connect the power supply unit (20) directly to
a socket outlet. Do not use the cable for any
other use.
3. Do not use the power supply unit if it is da-
maged (20). In the event of any damage to
cables or the power supply unit (20), contact
an authorized professional immediately for
replacement.
4. Do not charge the robot lawn mower in a
damp location. Do not charge the robot lawn
mower at temperatures above 40°C or below
5°C.
5. Keep the robot lawn mower and the power
supply unit (20) away from water, sources of
heat and chemicals. Keep the cable of the
power supply unit (20) away from sharp edges
in order to prevent damage.
6. Connect the power supply unit (20) to the
charging station (19) (Fig. 4b).
7. With the main switch (7) set to ON and with a
battery inserted, place the robot lawn mower
in the charging station (19) and charge it fully
before you use it for the fi rst time.
5.4.4 Information about charging
The robot lawn mower will return to the charging
station (19) in each of the following situations:
•
You send the robot lawn mower back manu-
ally.
•
The battery charge level drops below 30%.
•
The end of the daily work time has been
reached.
•
The rain sensor has tripped.
•
The robot lawn mower has become overhea-
ted.
•
When twilight falls, making it impossible for
the camera unit to work correctly.
In this case the robot lawn mower looks for the
guide cable (24) and then travels automatically
clockwise along the guide cable (24) as far as the
charging station (19).
The LED indicator (19a) on the charging station
lights up red while the battery is being charged.
When the battery is fully charged, the LED dis-
play (19a) at the charging station (19) will light
up green. A battery symbol will also indicate the
battery charge level in the display. A lightning fl ash
will appear in the battery symbol while the battery
is being charged.
If there is an obstacle on the guide cable (24)
during the trip back to the charging station (19),
the robot lawn mower will come to a stop in front
of the obstacle after several attempts and will not
be able to get back to the charging station (19).
Anl_FREELEXO_CAM_PLUS_SPK13.indb 45
Anl_FREELEXO_CAM_PLUS_SPK13.indb 45
GB
Remove all obstacles on the guide cable (24).
If the temperature of the battery exceeds 45 °C,
charging will stop in order to prevent damage to
the battery. Charging will resume automatically
once the temperature has dropped again.
If the temperature of the robot lawn mower con-
troller exceeds 65 °C, the robot lawn mower will
return to the charging station (19). Operation will
resume in accordance with the settings once the
temperature has dropped again. If the battery
becomes empty before the robot lawn mower has
returned to the charging station (19), the robot
lawn mower will be unable to start up again. Bring
the robot lawn mower back to the charging station
(19) and leave the main switch (7) switched on.
The robot lawn mower will be charged up auto-
matically.
5.5 Guide cable
IMPORTANT! A severed guide cable and any
consequential damages are not covered by the
warranty!
5.5.1 Laying the guide cable
The guide cable (24) can be laid both on the
ground and in the ground. The fastening pegs (23)
might break while they are being hammered into
hard or dry ground. If the ground is very dry, water
the lawn before installing the guide cable (24).
•
Installation on the ground
Lay the guide cable (24) securely on the
ground and fasten it with the supplied faste-
ning pegs (23). You can adjust the position of
the guide cable (24) during the fi rst weeks of
using the robot lawn mower. In the course of
time, however, the guide cable will become
overgrown with grass and will be no longer
visible. Install the guide cable (24) with a ma-
ximum distance of 1 m between the fastening
pegs (23). Avoid situations in which the guide
cable (24) is not actually lying on the ground.
Make sure that the guide cable (24) cannot be
severed by the robot lawn mower. While the
robot lawn mower is mowing, it will travel with
its activated mower unit over the guide cable .
•
Installation in the ground
Bury the guide cable (24) in the ground at a
depth of up to 5 cm. This will prevent damage
to the guide cable (24) during for example
scarifying or aeration.
Important!
Because the guide cable (24) is not always laid
along the lawn boundary, it is important to make
- 45 -
04.10.2024 10:05:46
04.10.2024 10:05:46
Advertenties
