Advertenties
Beschikbare talen
Beschikbare talen
12.
Setting the Reverse Function Switch
When the swash plate and the rail rotor react according
to the above movements, the function reversal switches
(1 - 6) are set correctly.
If the swash plate servos or the tail servo react precisely
opposite in one control movement, the respective func-
tion reversal switch must be switched.
The six switches (see figure 17) have the following functions:
Switches
1
2
3
4
5
6
To change the function, first disconnect the flight battery from the helicopter and then switch off the transmitter.
Then switch the respective switch from normal (= „NOR") to reverse (= „REV") or from „REV" to „NOR".
Then take the transmitter and the model into operation and test for correct control function.
76
All manuals and user guides at all-guides.com
Function
Roll function
Nod Function
Motor function
Tail Function
Gyro sensitivity
Pitch Function
Figure 17
Factory Setting
REV
REV
NOR
REV
REV
REV
Advertenties
