All manuals and user guides at all-guides.com
Nod and roll function
When moving the control stick for the nod and roll func-
tion (also see figure 1, item 6) forward and backward,
the swash plate (1) must tip forward and backward as
well according to the control stick movement (see upper
image in figure 15).
If you move the control stick for the nod and roll func-
tions to the right and left, the swash plate must tilt to the
right and left as well (see bottom image in figure 15).
If you switch the toggle switch for the swash plate path
limiter (also see figure 1, item 3) from the front from po-
sition „0" to the rear in position „1", the path limitation of
the swash plate of 70% is revoked.
The swash plate will now react at 100% of the control
path with much stronger tilting movements on the control
commands of the transmitter.
For the first test flights, we recommend moving the togg-
le switch forward to the „0" position and to switch on the
path limitation again.
When you have securely mastered the helicopter with
the reduced swash plate movements, you can switch off
the path limitation of the swash plate and use the full
agility of the helicopter.
Figure 15
74