Inhoudsopgave
Advertenties
Transport, Assembly, Putting into Operation and Decommissioning
Transport
4
Transport, Assembly, Putting into Operation and Decommis-
sioning
4.1
Transport
ATTENTION
4.2
Assembly (EUSTH/57-28 only)
DANGER
ATTENTION
NOTE
Figure 3
4330005_A0
Appliance damages caused by improper transport
In the case of off-site transport in a vehicle such as a lorry, the appliances
should be secured properly. The total brakes are not sufficient as a transport
securing method.
If the appliances are not secured properly, there is a risk of damage to prop-
erty and persons caused by squashing.
During transport, secure all the individually standing appliances using corre-
sponding transport securing devices.
Hazardous electrical voltage
The electrical voltage may be considerably dangerous to limb and life of per-
sons and lead to injuries.
All work on the electrical installations should only be carried out by a certified
electrician or by authorised specialists under supervision and monitoring of a
certified electrician according to the certain electro-technical regulations.
Risk of hot surfaces
The internal surfaces and base plates of the heated appliances can become
hot after the operation. The heated appliances should not come into contact
with light inflammable materials.
Fit thermally insulating plates onto the appliance. Ensure that there is enough
space between the housing and cladding required for air circulation.
Appliance location
The EUSTH/57-28 is a built-in appliance and may only be put into operation
after being retrofitted or built in (e.g. in a cabinet).
EUSTH/57-28 with dimensions given in inches (mm)
UST/57-28 | UST/57-28K | USTH/57-28 | USTUH/57-28 | EUSTH/57-28
Chapter 4
Page 17
Universal Crockery Dispenser
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
