Advertenties
Beschikbare talen
Beschikbare talen
The depth sensor must be positioned near the bottom of the tank, ensuring that it is above any solid residue or impurities, present or future.
ATTENTION: incorrect wiring of the sensor can damage the appliance and the sensor.
7.7
Setting with the display, wizard
The Ebox D can be configured with a simple wizard. The device asks the user for all the parameters necessary for its configuration. If
necessary, it can be loaded by pressing the "set" + "+" keys when switching on. To navigate in the wizard, use the following keys:
"mode" to accept the parameter displayed and move on to the next,
•
"mode" held down for more than 1 second to return to choose the parameter,
•
"-" e "+" to vary the value of the parameter.
•
7.8
Configuration of floats or level probes
After configuration, the system status will be one of those shown in Figure 37, depending on whether level probes or floats are used.
Figure 36: Configuration of Drainage floats or level probes
Figure 37: System status in drainage mode, A with level probes. B with floats
ENGLISH
Pressure sensor connections
Terminal
11
12
Figure 35: Depth sensor connection
89
4..20mA
Cable to be connected
- OUT/GND
+VCC
Advertenties
