Advertenties
Beschikbare talen
Beschikbare talen
A number of blinks of these leds that indicates the type of error.
•
A remote signal on the relays: Q1 Q2 Q3. This signal can be used to turn on sirens and/or blinking or fixed lights. These
•
contacts can also be sent to a telephone dial to obtain alarms via GSM. In general, Q1 indicates errors of the pump P1, Q2
those of the pump P2, and Q3 those of the system.
The table below indicates the following for each alarm, indicated by leds and relays:
Brief description. More detailed descriptions are supplied in the following paragraphs.
•
Alarm symbol.
•
Number of blinks of the pump alarm leds.
•
Number of blinks of the system alarm leds.
•
If the alarm is self-resetting or if resetting must be done manually with the pump alarm reset or global reset buttons.
•
If the alarm is blocking or if it still allows operation of the panel.
•
Which relay contacts are closed in the presence of the alarm. In general, Q1 indicates errors of the pump P1, Q2 those of
•
the pump P2, and Q3 those of the system.
Name of alarm/malfunction
Alarm
relay/remote control switch
Pump disconnected
Dry operation alarm
Alarm
too frequent starts
Current overload alarm
Alarm coming from R
Alarm coming from N
Pressure/depth sensor alarm
incoherence alarm
Floats
Dip-switch Incoherence alarm
Key error alarm
Input voltage alarm
Voltage selector error alarm
ENGLISH
Led signal
Alarm property
on front board
**
**
**
**
**
X (***)
105
Remote signal
X
X
X
X
*
X
X
X
X
X
*
X
X
X
X
X
X
X
X
X
**
X
**
X
X
X
X
X
**
X
X
X
X
X
X
X
Advertenties
