Advertenties
Beschikbare talen
Beschikbare talen
- OM: Changed operating mode
This message is only a warning and is not an error. It appears only in the alarm log and indicates that the configuration of the Ebox
has been changed, for example from drainage to pressure boosting.
- E0..E15: Internal error
Panel internal error. This error cannot be reset. If this error appears, check the supply voltages and the wiring. If everything is in order,
the Ebox has suffered internal damage and must be repaired.
11
RESET AND FACTORY SETTINGS
11.1
General system reset
To reset the Ebox, switch the panel off and on again. The operation does not delete the settings saved by the user.
11.2
Restoring the factory settings
To restore the factory values, switch off the Ebox, wait until the display has switched off completely, press and hold down the "SET"
and "+" keys and turn on the power; release the two keys only when the letters "EE" appear.
After this procedure the configuration wizard starts.
If the display is not present, it is sufficient to change the DIP SWITCH configuration to Ebox not supplied and supply the Ebox again.
ENGLISH
111
Advertenties
