Advertenties
Beschikbare talen
Beschikbare talen
c) Loading battery data
• Use the "INC" or DEC" buttons to select the function "BATT MEMORY".
• Confirm your selection by pressing the "ENTER/START" button. The data
memory's number flashes.
• Use the "INC" or "DEC" buttons to select one of the 10 memory profiles.
When data has been stored in the memory, the display cycles
through displaying e.g. battery type and number of cells as well as
charging and discharging current.
If the memory is empty, only "ENTER SET ->" is shown.
• Load the battery data of the selected memory by holding down the
"ENTER/START" button for about 3 seconds.
The message "ENTER CHARGE LOAD ....." appears on the display; the
data is loaded and the desired charge/discharge program can then be
started (press the "ENTER/START" button again for 3 seconds).
If the memory is empty and you keep the "ENTER/START" button pressed for 3 seconds, the charger will
start the selection/setting mode; see Chapter 14. a).
84
All manuals and user guides at all-guides.com
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 1]
LiPo
7.4V(2S)
[ BATT MEMORY 2]
ENTER SET->
ENTER CHARGE
LOAD....
Advertenties
