Advertenties
Beschikbare talen
Beschikbare talen
End discharge voltage per cell
DSCH VOLTAGE
3.0V/CELL
Here you can set the voltage per cell at which the process of discharging is terminated.
Caution!
Never set the voltage too low. In lithium batteries, for instance, this may lead to a deep discharge and
permanent damage to the battery!
Pay attention to the table in Chapter 7 and the manufacturer's special battery specifications.
End charge voltage per cell
TVC=YOUR RISK!
4.20V
Here you can set the voltage per cell at which charging is terminated for lithium batteries.
Caution!
Never set the voltage too high. In lithium batteries this can cause a fire or an explosion of the battery!
Pay attention to the table in Chapter 7 and the manufacturer's special battery specifications.
Shutdown at excessive temperature
TEMPERATURE
CUT-OFF
The charger can end the charging/discharging process automatically if the battery exceeds the temperature set
here.
An external temperature sensor (not included) is required to be able to use this feature. The sensor must be
connected to the corresponding socket on the charger.
Maintenance charging current (only NiMH and NiCd batteries)
TRICKLE
100mA
Set the maintenance charging current here. If a NiMH or NiCd battery is fully charged, it loses some of its capacity
again by self-discharge. The maintenance charging current (short charging pulses, no continuous charge current!)
ensures that the battery remains fully charged. This prevents the formation of crystals in the battery, too.
82
All manuals and user guides at all-guides.com
50C
Advertenties
