Advertenties
Beschikbare talen
Beschikbare talen
• If you need to change the value of the discharging current, press the button "ENTER/START". The discharging
current flashes. Change the discharging current with the "INC" and "DEC" buttons. Press and hold the respective
button a little longer for fast adjustment.
Confirm the set discharging current by pressing the "ENTER/START" button.
• Press and hold the "ENTER/START" button (approx. 3 seconds) to start the discharging process.
The charger will beep if the settings are wrong or a malfunction is detected and the corresponding informati-
on is displayed on the screen. End the warning signal with the "BATT/PROG/STOP" button, and the charger
will go back to the previous setup menu.
During the discharging process, the following data may be displayed on the screen:
The battery type ("Pb" = lead-acid battery) is shown at the top left, the
discharging current top centre and the current battery voltage top right.
Bottom left has the current battery program ("DSC" = "DISCHARGE"); the
elapsed discharged time is in the middle, and to the right is the discharged
capacity in mAh.
• An audible signal sounds (if this feature has not been turned off) when discharging is complete.
Press the "BATT/PROG/STOP" button if you wish to abort discharging.
All manuals and user guides at all-guides.com
Pb-6 0.4A 12.59V
DSC 022:45 00132
79
Advertenties
