Advertenties
Beschikbare talen
Beschikbare talen
14. SAVING/LOADING BATTERY DATA
The charger can store up to 10 memory profiles in which the battery data/settings are saved. These can be
called up as needed.
a) Selecting/setting battery data
• Use the "INC" or DEC" buttons to select the function "BATT MEMORY".
• Confirm your selection by pressing the "ENTER/START" button. The data
memory's number flashes.
• Use the "INC" or "DEC" buttons to select one of the 10 memory profiles.
When data has been stored in the memory, the display cycles
between showing e.g. the battery type and cell count as well as the
charging and discharging current.
If the memory is empty, only "ENTER SET ->" is shown.
• Confirm the selected memory number by pressing the "ENTER/START"
button.
The battery type is shown first; see image on the right.
Use the "INC" or "DEC" buttons to select the desired setting (e.g. battery type, cell count, charging current,
etc.).
If you would like to modify a setting, press the "ENTER/START" button briefly. The value to be configured
starts flashing.
Change the flashing value with the "INC" or "DEC" buttons. Press and hold the respective button a little
longer for fast adjustment.
Complete your configuration by briefly by pressing the "ENTER/START" button. The value to be configured
stops flashing. You can now choose another setting feature; see above.
If all previous settings are to be stored in the memory you have
selected at the beginning, you must complete the action by calling up
the function "SAVE PROGRAM" with the "INC" or "DEC" buttons and
press the "ENTER/START" button briefly.
If you don't, you will lose all settings! After that, the display shows the indicator with the flashing memory
number.
To cancel previous settings and to exit the setting mode, press the "BATT/PROG/STOP" button repeatedly
until the main menu appears again.
80
All manuals and user guides at all-guides.com
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 1]
ENTER SET->
BATT TYPE
LiPo
SAVE PROGRAM
ENTER
Advertenties
