DAB esybox mini3 Instructies Voor Installatie En Onderhoud pagina 56
Verberg thumbnails
Zie ook voor esybox mini3:
- Gebruiks- en onderhoudsaanwijzing (40 pagina's) ,
- Gebruiks- en onderhoudsaanwijzing (681 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
The list of Errors and Alarms can be found in Table 15 and Table 16 in Chapter 6.
Status
Active
Stopped
Disabled
Error
KIWA Sensor Error
Icon
Identifying code
Description
GO
Motor running
SB
Motor stopped
DIS
Motor status manually disabled
FAULT
Presence of an error preventing operation of the electropump
WARNING
Indicates an Alarm that does not prevent operation of the electric pump.
The other menu pages vary with the associated functions and are described later by type of indication or setting. Once you have entered any
menu, the bottom of the page always shows a summary of the main operating parameters (running status or any fault, current speed and pressure).
This allows a constant view of the machine's fundamental parameters.
Pages showing parameters can display: numerical values and units of measure of the current item, values of other parameters linked to the setting
of the current item, graphic bar, lists; see Fig.16.
4.5 - Blocking parameter setting by Password
The device has a password-enabled protection system. If a password is set, the parameters of the device will be accessible and visible but it will not be
possible to change them. The password management system is in the "technical assistance" menu and is managed by means of the parameter PW.
4.6 - Enabling and disabling the motor
In normal operating conditions, pressing and then releasing both the "˄" and "˅" keys causes the blocking/release of the motor (self-holding even after
switching off). If there is a fault alarm, the operation described above resets the alarm. When the motor is disabled this status is shown by the blinking
white LED. This command can be activated from any menu page except RF and PW.
ENGLISH
Main Page: Status Icons
Icon
Table 10: System Status Icons
Main Page: Auxiliary Functions Icons
Description
Power Shower
Float
Sleep Mode
Table 11: Auxiliary Functions Icons
Footer: Indications on the status bar
Table 12: Indications on the status bar
Figure 16: Display of a menu parameter
53
Description
Motor running
Motor stopped
Motor manually disabled
Blocking error: the type of error is shown and
described in the bottom left corner of the screen
"Low suction pressure" error signal
Advertenties
