Advertenties
Beschikbare talen
Beschikbare talen
Maintenance and operating instructions ZAF-2
Lubrication work
1 Lubricate the coupling head
– every 10,000 12,000 kilometres or
annually –
Oil ball hitch at regular intervals at the
specified locations and moving parts.
Grease the contact surface of the ball of
the towing vehicle.
Caution:
If safety couplings are used (e.g. Winterhoff
"WS 3000 D") the connection hitch /
trailer must be free of grease and oil.
2 Pull rod bushes on the housing of
the overrun hitch
– every 10,000 12,000 kilometres or
annually –
Apply general purpose grease via the
grease nipples.
10
Coupling head "Berndes"
Coupling head "Winterhoff"
3 Reversing lever
– every 10,000 12,000 kilometres or
annually –
Check reversing lever for ease of motion.
If fitted, apply general purpose grease via
the grease nipple until fresh grease can
be seen emerging from the bush.
If grease nipples are not fitted, then apply
oil to the reversing lever bush.
Lubricate the contact surface between
the steering lever and the push rod plate.
4 Moving parts such as bolts and joints
to be oiled or greased.
– every 10,000 12,000 kilometres or
annually –
All moving parts of drawbar, handbrake
lever, spring actuator, reversing lever,
linkages etc. to be oiled or greased as
required.
11
Advertenties
