Advertenties
Beschikbare talen
Beschikbare talen
8. CANbus functions
The HMCflex supports these CANbus functions according to SAE J1939.
All measured values and fault messages of the HMCflex are output on the CANbus. HMCflex behaves
similar to an ECU with source address 0.
The measured values are thus compatible with many standard CANbus display devices.
The compatibleehb devices are, amongst other, CANcor, CANflex, CANarmatur, CANinfo and
CANmonitor.
8.1 Messages on CANbus / Transmitted Messages via CANbus
According to SAE J1939 250 kbit 29 bit identifier by address 00h (standard).
8.1.1 PGN 61444 Electronic Engine Controller 1 - EEC1
SPN 190 Engine Speed
Example:
0CF00400
8
FF FF FF 79 CC FF FF FF
8.1.2 PGN 65253 Engine Hours, Revolutions - HOURS
SPN 247 Engine Total Hours of Operation
Example:
18FEE500
8
A6 05 2C 93 00 00 00 00
8.1.3 PGN 65262 Engine Temperature 1 - ET1
SPN 110 Engine Coolant Temperature
SPN 175 Engine Oil Temperature 1
Example:
18FEEE00
8
7D FF C0 2C FF FF FF FF
ture=85°C )
8.1.4 PGN 65263 Engine Fluid Level/Pressure 1 - EFL/P1
SPN 100 Engine Oil Pressure
Example:
18FEEF00
8
FF FF FF BC FF FF FF FF
8.1.5 PGN 65271 (R) Vehicle Electrical Power 1 - VEP1
SPN 168 Battery Potential / Power Input 1
Example:
18FEF700
8
FF FF FF FF 3A 02 FF FF
8.1.6 PGN 65269 Ambient Conditions – AMB
SPN 171 Ambient Air Temperature
Example:
18FEF500h
8
FF FF FF 00 25 FF FF FF
32/40
Operating Instructions
every 10ms
(speed=6543.1 RPM)
every 1000ms (operating hours= 123456789.1 h)
every 1000ms (cooling temperature=85°C oil tempera-
every 1000ms (oil pressure 7.5 bar)
every 1000ms (battery voltage=28.5V)
every 1000ms (internal temperature= 23°C)
Versoin 2.9.4
HMCflex
© ehb Errors expected.
Advertenties
