Advertenties
Beschikbare talen
Beschikbare talen
Maintenance and operating instructions ZAF-2
Lubrication and maintenance work
For detailed description see pages 9 11
Function test
Check coupling.
1
2 Apply the handbrake lever and observe the linkage.
Lubricate
1 Lubricate the coupling head.
2 Drawbar bearings at the housing of the overrun hitch.
3 Oil or grease brake lever.
4 Oil or grease moving parts such as bolts and joints.
Maintenance work
1 Overrun hitch function check.
2 Check drawbar, handbrake lever, spring actuator, reversing lever,
linkage and all movable parts for ease of movement.
3 Check permitted vertical play.
4 Check safety cable for damage.
8
Function test
1 Check coupling head
– prior to each run –
Check coupling head for wear and correct
operation.
Check the wear indicator (use within
the "+" range only).
Check the coupling head fastenings (see
item 1) at regular intervals for firm seating.
Safety coupling Winterhoff "WS 3000 D"
Checking the stabilising facility
The condition of the friction linings can be
checked after coupling and activating the
stabilising facility. The name plate attached
to the operating lever shows a triangle
marked with +/ signs parallel to the slot
in the lever which runs in the direction of
travel. The ball head hitch is factory set
so that the head of a pin visible in the slot
lies beside the triangle side marked with
the + sign.
2 Apply the handbrake lever and
observe the linkage.
– prior to each run –
1
+
9
Advertenties
