Inhoudsopgave
Advertenties
EN
•
If there is an error (battery or circuit failure), one of the indicators flashes
rapidly without interruption.
•
The device may not be used when it is charging.
•
Battery life:
The battery life will depend on the intensity you choose. A correctly charged
Luminette® device should stay lit between 3 and 6 hours.
When you turn the device off, between 1 and 3 battery indicators light up to give
you an indication of the remaining battery life (3 indicators = the battery is fully
charged; 2 indicators = the battery is 2/3 charged; 1 indicator = the battery is 1/3
charged; 1 flashing indicator = the battery is insufficiently charged to be able to
complete a session).
We recommend recharging your Luminette® when there is only one indicator
remaining when you turn the device off.
F. Switching on and off
Attention: before your first use, be sure you take off the protective film over the
hologram.
Ensure that the battery is charged so that your Luminette® will work for the entire
session chosen. Press the Start-Stop button briefly to turn your Luminette® on
(see figure 1).
To change the intensity of the light, just press the Start-Stop button briefly. The
intensity will change in a cycle: level 1, then level 2, level 3, and back to level 1, etc.
Luminette remains on for a set period and will automatically shut down when the
period is over. To turn your Luminette® off in the middle of a session, hold down
the On-Off button (for 2 seconds).
G. How to wear my Luminette®
For the best results, you need to wear your Luminette® correctly.
To properly position your Luminette®:
•
Set the nosepiece into one of the three slots (see Figure 1). A "click" sound
means that your nosepiece is correctly inserted. To take it out, pull firmly on it.
14
•
Place the padded part of the nosepiece where your nose and forehead
meet. The lower edge of the holographic visor should be located just above
your line of sight (see figure 2) when you look into a mirror.
Please note that if you wear glasses, the nose bracket of the Luminette® should
be behind your glasses (see figure 3).
Once the session has begun, keep your eyes open. Carry on with whatever you are
doing. Do not look directly into the LEDs.
H. How to look after my Luminette®
This device is meant exclusively for personal use. Between each use, store the
device in its protective case in a dry place.
To clean your Luminette®, use a soft cloth moistened with a little clean water.
Be careful to protect the fragile holographic zone; avoid touching it with your
fingers. If, despite everything, it gets dirty, clean with cotton wool.
III. Myluminette app - instructions
A. Installation of the app
Search for the app called "Myluminette" in the Apple store or in Google Play store.
Download and install it on your smartphone.
B. Create your profile
Once you have installed the app "Myluminette", you are asked to create a profile
and enter some basic personal information.
C. Pair the app with my Luminette
Press and hold the on/off button of your Luminette for more than 5 seconds to
start the pairing mode. The 3 LED light indicators will start flashing slowly when
the pairing mode is activated.
Turn on the Bluetooth functionality on your smartphone and select Luminette
in the list of detected Bluetooth-emitting devices. Your Luminette should be
now paired with your smartphone. You can use the app and have access to your
personal usage history.
EN
15
Advertenties
Inhoudsopgave
