Advertenties
Beschikbare talen
Beschikbare talen
INSTRUCTIONS FOR USE
Step 1: Using the hex tool provided unscrew the outer clamp.
Step 2: Once the clamp has been removed unscrew the retaining collar using the tool
provided.*
Step 3: Remove the slip washer.
Step 4: Remove the glove support collar.
Step 5: Remove the 'O' ring from the glove.
Step 6: Insert the glove support collar into the new glove. Push the collar into the glove so that
the glove is stretched around the collar. Note The collar MUST be inserted into the glove
with the MICROCHEM name towards the fingers of the glove.
Step 7: Locate the 'O' ring over the glove and fit into the recess of the support collar. Feed the
glove into the cuff, ensuring the left glove is in the left and the same for the right glove.
Make sure that the back of the glove is central to the back seam of the suit sleeve.
10. Pass-through option
External connection
Internal umbilical hose for
connection to SCBA
11. Size Chart
Suit Size
S
B
M
L
A
XL
2XL
3XL
12. EU Type Approval Data
See EU type approval on page 2. Tests and classifications according to EN 14325:2018 and EN 14126:2003.
It should be noted that all chemical testing was performed on swatches of suit material under laboratory conditions, not under actual workplace environments. The user must determine the
applicability of the results obtained under laboratory conditions to the actual conditions of use. Information presented is subject to change without notice.
Property
Test Method
Abrasion
EN 14325:2018, EN ISO 12947-2
Flex cracking
EN 14325:2018, EN ISO 7854:B
Flex cracking -30
C
EN 14325:2018, EN ISO 7854:B
o
Tear resistance
EN ISO 9073-4
Tensile Strength
EN ISO 13934-1
Puncture Resistance
EN 863
Resistance to Flame
EN 14325:2018, EN 13274-4 method 3
Seam strength
EN ISO 13935-2
Zipper strength
EN 943-1:2015, EN ISO 13935-2
Class
Permeation Time
Hose connection to SCBA
Body Measurements (cm)
Chest
Height (A)
Circumference (B)
164 - 170
84 - 92
170 - 176
92 - 100
176 - 182
100 - 108
182 - 188
108 - 116
188 - 194
116 - 124
194 - 200
124 - 132
SUIT MATERIAL AND SEAM – MECHANICAL DATA
CLASSIFICATION OF PERMEATION BREAKTHROUGH TIME
1
2
>10 min
>30 min
Step 8: The slip collar should now be fitted over the glove and pushed up to the support collar,
with the wide rim against the support collar and glove.
Step 9: Slide the glove retaining collar over the glove.
Step 10: Screw the retaining collar clockwise into the cuff, until tight. Make sure the retaining
collar is tight using the tool provided.
Step 11: Locate the safety retaining clamp around the cuff and retaining collar, with the
tightening screw at the back of the glove. Make sure that the clamp is located over the
rim of the cuff and that the lugs are located between the retaining collar grips. Tighten
the screw using the tool provided, until both lugs under the screw are located between
the grips, with a 2mm gap.
*Gloves should be worn when removing the retaining collar as contamination may not have
been completely removed from the collar during decontamination
The pass-through suit option includes a 360
the suit fitted. It has an umbilical hose inside the suit for connecting to the
ancillary airline connection on the SCBA. The maximum working pressure
of the pass-thru is 10 bar.
! WARNING:
- the pass-through is only intended to provide breathable air beyond the
time limit of the SCBA, for decontamination purposes and should never
be used in isolation.
- prior to use please check with Ansell Ltd or your respiratory equipment
manufacturer on the compatibility of the pass-through with your SCBA
system.
Boot to Suit Size Guide
Suit Size
Boot UK
S to M
9
L
10
1/2
XL
11
1/2
2XL to 3XL
13
Glove to Suit Size Guide (GA2 set)
Suit Size
02-100 Glove
S to XL
10
2XL to 3XL
11
Class Requirement
> 2,000 rubs
> 1,250 cycles
> 200 cycles
> 150 N
> 250 N
> 50 N
1 sec in flame, leak tight afterwards
> 500 N
> 500 N
3
4
>1 hr
>2 hr
5
EN
o
connection on the outside of
Boot Europe
Boot USA
43
9.5
45
11
46.5
12
48
13.5
38-560 Glove
10
11
Class
6 of 6
2 of 6
2 of 6
6 of 6
4 of 6
3 of 6
2 of 3
6 of 6
6 of 6
5
6
>4 hr
>8 hr
Advertenties
Hoofdstukken
