8.3.2
Lijst met foutcodes Yanmar motor
Nr. 01
Ilashes/
llashing
Fault (alarm) location
pattern
of fault
indicator
Coolant temperature
4
sensor
5
Accelerator sensor
6
Speed sensor
7
Rack position sensor
8
Rack actuator
1-3
EGR valve
CSD
1-4
elektromagnetische
klep
Fault/alarm condition
Continues to run at a
Sensor voltage is over
coolant temperature
4,8V or under 0,2V
Sensor voltage is over
Continues to run at
4,8V or under 0,2V.
Engine start switch
Is shut down. (When
(E8) is on, but engine
optional auxiliary
speed is zero.
equipped: Auxiliary
speed senor works in
place of faulty speed
Engine speed
sensor and engine
momentarily
continues to run at
decreased to lower
up to 1800 rpm. If
than specified lower
auxiliary sensor also
limit.
fails, engine is shut
Continues to run
without rack position
Rack position relative
sensing at up to 150%
to rack actuator is
of low idling speed
without specified
or 80% of high idling
limits.
speed, whichever is
Rack actuator output
is without specified
limits.
Engine accelerates
even though rack
actuator output is
minimized.
Engine stalls while
rack position sensor
fails.
LOW status was
detected even though
Continues to run at
port was off.
up to 92% of rated
power output and up
HIGH status was
detected even though
port was on.
LOW status was
detected even though
Continues to run
port was on.
while CSD feature is
LOW status was
detected even though
port was off.
Engine status
Reset condition
Voltage returns to
of 30°C.
Voltage returns to
1500 rpm.
speed sensor is
Key switch is turned
down.
Key switch is turned
lower.
Key switch is turned
Is shut down.
Key switch is turned
to 1800 rpm.
Key switch is turned
canceled.
Availability
of detection
features
Standaard
normal.
Default
normal.
Standaard
to OFF.
Standaard
to OFF.
Standaard
to OFF.
Default
to OFF.
Standaard
to OFF.
141
141
141