Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
• The supply cord must hang freely and should not be fed through
a drawer.
• For connecting, use an approved cable with the correct cable
diameters appropriate for the connection. The cable casing should
be made of rubber (preferably of the H05V2V2 or H07V2V2 type).
• Before connecting the appliance, make sure the voltage indicated
on the rating plate conforms to the voltage in your power mains.
• The connection should be adjusted to the current and fuses.
• The appliance should not be connected to the mains via a
multi-plug adapter or extension cable, as the safe use of the
equipment cannot be guaranteed.
• After installation, the parts carrying electrical current and insulated
parts shall be protected against contact.
•
WARNING!
Failure to use screws or fasteners for installation as described
in the installation instructions may result in electric shock.
Gas connection
• Gas connection 1/2" ISO 228 / ISO 7-1 / EN 10226-1 (1/2" ISO
228 / 1/2" ISO 228 FR only).
• The gas connection must comply with national and local
regulations. See appliance label for technical gas data.
• This appliance is not connected to a combustion products
evacuation device. It shall be installed and connected in
accordance with current installation regulations. Particular attention
shall be given to the relevant requirements regarding ventilation.
• We recommend that the gas hob be connected by means of a
fixed pipe. Connection using a specially designed safety hose is
also permitted.
• The pipe behind the oven must be made entirely out of metal.
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
54
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
