Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Table continued from last page
Con - Connection
power
Current limiter
(connection to power
grid)
dE - Demo mode
Demo Mode for Dealer
Showrooms
If your electrical wiring or circuit breakers do not meet the specified current
draw on the rating plate, the current limiter can be activated by reducing
the value of this setting. Doing so may cause a reduced performance of
the induction hob.
The following numbering format of the setting is available: X.XX.
The number left of the dot represents the number of connected phases,
while the number right of the dot represents the electrical current per
phase in Ampere.
NOTE!
To prevent unintentional adjustment of the 'Con - connected power',
Con setting must be confirmed when changed by touching the slider
for 3 seconds. A change without confirmation will not be implemented!
WARNING!
The appliance must always be set to the actual or lower rating of the
electrical wiring or circuit breakers. This setting can only be set by an
authorised expert.
In demo mode, the appliance will act as usual, without the possibility to
heat the cookware.
When set, this will be indicated after switching on the appliance with a
short "d" indication.
Without any user interaction, the appliance will automatically switch off
after 10 minutes.
Settings
45
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
