3.4. Starting attempt
When using the Booster to start an engine, do not crank for more than 8-10
seconds, and wait for a further 3 minutes before a second attempt.
If after the 3rd attempt the engine does not start, it may be necessary to identify a
further cause for the breakdown.
NOTE: If your Booster is fully charged but the starter turns slowly, the vehicle's or
Booster's battery may need checking for short circuit.
3.5. Protection
Boosters are equipped with an internal fuse. It can melt following a short circuit or
a too long start attempt, for example.
Two methods to control the fuse:
1.
Push on the voltmeter, if it does not deviate, the fuse is melted.
2.
This can be determined by checking it like the example below.
Beeeeep
= OK
64
FUSE
INSIDE