Inhoudsopgave
Advertenties
,CHASSIS
Band C-SERIES
Steering Shaft Adjustments
Both Band C-Series use similar linkage.
Upper Adjustment
1. Release the set screw on the collar.
.
2. Press down on the steering wheel.
Fig. 8-1 Band C-Series Upper Steering Adjustment
3. Slide collar up against bushing and tighten set screw.
:
Lower Adjustment
Gear mesh is adjusted as follows:
1. Remove cotter pin from lower steering shaft.
Fig. 8-2 Band G-Series lower Steering Adjustment
2. Add or remove enough shims so that 0 to .015 inch
(.4
mm) end play remains in shaft.
SECTION
e
UPPER STEERING SHAFT
LOWER STEERING SHAFT
Fig. 8-3 B-Series Steering
----- --------------
UPPER STEERING SHAFT
LOWER STEERING SHAFT
8-1
Fig. 8-4 C-Series Steering
Advertenties
Inhoudsopgave
