Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connection diagram for 13- pole plug:
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
BREAK TIME
The spraying can be stopped arbitrarily by releasing the handle off the spray
gun. Next acts one must comply, if the spraying pause last longer than ten
minutes (or by abandoning the working area):
• After cleaning at use of the burner, the temperature must be 0°C and you
have to spray during at least an other 5 minutes for cooling down the burner
sufficiently.
• When you decide to switch between steam function and high pressure
function: rince with cold water during 10 minutes (cooling down).
• Switch off the machine completely. Put therefore the key contact to position
"0".
• Release the pressure of the pressure hose by pushing the handle of the spray
gun for a moment.
PUMPS HT
There must be present a pre - pressure (pump) at HT pumps (pumps with high
temperature). The pre - pressure (pump) must provide for sufficient flow of
water to feed the high pressure pump and to occur cavitation. Cavitation is
the phenomenon that in a moving fluid the local pressure is going to be lower
than the vapour pressure of the fluid. Because of this mist bells will arise who
can implode with high power in the pump and could cause damages. For all
these applications at high temperature, it is ABSOLUTELY ESSENTIAL to feed
the pump with positive pressure (at least 3 bar) and with a sufficient quantity of
water.
DiBO 31
COLOUR
yellow
left indicator
blue
white
mass (for poles 1-8)
green
right indicator
brown
right rear light
brake lights : left &
red
black
left rear light
grey
reversing light
white/black
mass (for poles 9-12)
E N
AC T I VAT I O N
NAME
fog lamp
right
Advertenties
Hoofdstukken
Inhoudsopgave
