Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1 high pressure function
2 low pressure function / High
temperature (or steam) function
24 O P T I O N H I G H P R E S S U R E VA LV E
The high pressure valve is located below the control panel at the left high
pressure hose reel and with it, you can close the water supply of the left
spray equipment or by using both reels. Pay attention: use the correct spray
equipment! Steam lance 400 mm for single reel use, steam lance 200 mm for
double reel use. Note: the high pressure valve is not mounted when you choose
a low pressure hose/reel & high pressure hose/reel.
1
2
25 S A F E T Y T H E R M O S TAT C H I M N E Y
If the temperature on the temperature probe exceeds the setpoint value.
The chimney thermostat will now arrange that the fuel valve and the burner
motor will be interrupted directly. The chimney thermostat can only be reset by
means of pushing the green reset button on the thermostat (first unscrew the
black protection) in the burner electric box.
26 T R AC K & T R AC E ( O P T I O N )
The trailer can be equipped with a tracker. The necessary information/data can
be achieved via a login on the tracker website. Also use/reed the delivered
manual of the tracker (1.780.510). During longer shutdown (few months) the
slumber consumption from the tracker can assure that, the battery of the trailer
can get empty. To prevent this, the tracker can be disconnected if the machine
is stored / stocked for a long time. The disconnecting of the tracker is easy by
removing the fuse to the tracker. This fuse is mounted in a fuse holder or fuse
terminal in the electric box. See the table / indicative photo for the marking and
description. Remove the fuse (1A) from the holder or click the terminal open to
uncouple the power supply to the tracker.
MACHINE TYPE
CABINET
JMB-M
Burner cabinet
JMB-S
Burner cabinet
JMB-MD
operating cabinet
JMB-MG
Main cabinet
JMB-ME
Main cabinet
Note: when disconnecting the tracker, no more
location, hours or error messages are registered!
When the tracker has power supply, the tracker will attempt to connect to GPS
satellites, which will update the date and time and the device will receive the
correct settings again after which it will send all the logged data to the platform.
The SIM card must have a connection with a mobile phone network to send all
relevant data.
27 P R O F E S S I O N A L S W I TC H M O D E B AT T E RY C H A R G E R ( O P T I O N )
The trailer with track & trace will be standard equipped with a charging cable
(1.701.075) to connect any professional switch mode battery charger (1.701.210)
on the battery.
DiBO 21
O P E R AT I O N
2
FUSE NR.
POSITION
F14
Holder
F14
Holder
XF4
Terminal
XF10
Terminal
XF4
Terminal
E N
2
Advertenties
Hoofdstukken
Inhoudsopgave
