Download Inhoudsopgave Inhoud Print deze pagina

Temperature Settings; High Cleaning Temperatures; Settings With Control Stick; Control Screen 1 (Operating Instructions) - Dibo JMB-MD Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

E N
  AC T I VAT I O N
1

Temperature settings

Determine experimentally which engine speed (spray pressure) and at which
temperature the object best can be cleaned without damaging it.
Protein-containing material, rubber or synthetic material: knob not higher than
50°C. For the other settings the most diverge materials and/or machines will be
cleaned. Therefore, there are no fixed settings to be displayed.
2

High cleaning temperatures

A cleaning temperature of more than 95°C can only be obtained by reducing
the number l/min produced by the high pressure pump. By placing the throttle
lever to the left ( min. pressure, min flow) or by reducing the engine speed
setting on the display one reduces the number of l/min. The temperature shall
increase maximum until the set value is reached. If the flow is low, the flow
switch shall put the burner out of use, to prevent that the temperature will
increase.On the left & right side you can check the tank levels (fuel & water - if
option is selected). When the level will decrease below 20%, the display will
visualize the level in red color. Above 20%, the filling level will be displayed in
green color. Below the temperature indication you can see if the burner is active
or not. If you move the control stick 1x up & 1x down, the burner will turn off.
Temperature indication then becomes 0° C. The burner hours are visible on the
home screen if pushed on the clock key (see photo @ bottom right). The burner
hours will only be visible at the time of pushing the (clock) key.
3

Settings with control stick

The screen includes a number of possible operating pages as shown on this
page (depending the selected options) when the control stick is operated.
General: when not operating the control stick, the control unit will automatically
return for 20 seconds to the main screen.
4

Control Screen 1 (Operating Instructions)

In this screen you can choose to check the various operating instructions.
Move the control stick to the left (no) or right (yes) to select.
DiBO 26

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

1.780.300

Inhoudsopgave