Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
E N
O P E R AT I O N
1 mixing valve
2 quick couplings
3 adjusting knob - lance
Pay attention: the battery may not be charged constantly!
The trailer (machine) may not be switched on at any
circumstances during the charging procedure!
For info: If the battery clamps are incorrectly connected, the reverse polarity
protection will ensure that the battery and charger are not damaged.
Estimated time for charging (for an empty battery): +- 20h. The charger is
designed for charging only for batteries according to the technical specification.
See also the delivered manual of the professional switch mode battery charger.
Ensure sufficient ventilation when loading!
28 T E M P E R AT U R E C O N T R O L L E R ( O P T I O N A L )
The temperature controller ensures that the output temperature remains
constant, regardless fluctuations in the temperature of the supplied water
(within the limits of the system). This system also ensures optimum load of the
burner, which benefits the emissions and lifespan of the burner (less circuitry).
Also the water heating at cold start will work out faster.
29 D E S C A L I N G C O I L ( O P T I O N A L )
The descaling coil is an additional accessory and is located around the high-
pressure hose at the entrance to the burner boiler. This coil need to prevent
possible lime formation in the supply hose and in the burner coil.
The coil gives a signal that changes the shape of the lime minerals in the water.
As a result, small groups are formed that can no longer attach themselves to the
components and will therefore flush out of the pipes/hoses. This coil extends
the service life of the components exposed to limescale deposits.
30 B AT T E RY C I R C U I T B R E A K E R ( O P T I O N A L )
The battery circuit breaker is mounted sideways the command panel (see
photo). Turn the switch to interrupt the battery. The purpose is to interrupt the
electrical circuit between battery and starter & other consumers. This offers an
effective safeguard against theft and the danger of fire at parked trailer.
31 I N J E C TO R ( O P T I O N A L )
The injector is optional in 2 different versions namely: fixed mounted version
and removable version. The fixed version does not have the quick couplings
and is attached directly in the flow line. The removable version has a mixing
valve (1) which is equipped with quick couplings (2) to easily remove the product
injector (see pictures below).
Be aware that you have to uncouple the quick couplings ONLY when
the machine is off and there is no pressure inside the hoses anymore!
If you choose to work with a product, you have to reduce the pressure by
turning the lever (adjusting knob - 3) of the special spray lance.
The mixing valve is necessary to adjust the quantity of desired product.
Adjust the desired quantity of the product experimentally.
• Turn to the right to increase the desired product
• Turn to the left to decrease the desired product
1
2
DiBO 22
3
Advertenties
Hoofdstukken
Inhoudsopgave
