Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Spray gun
• Do not spray: release the lever in the handle.
• Spraying: push the lever in the handle.
• Spray security: release the blocking pawl in the handle.
The machine is standard equipped with a single lance. When changing the
spraying tool, always turn off the cleaner first!
7 C OV E R
The protective cover can be opened/closed easily by means of the locking
button. The cover must be closed when starting the spray activities (when
engine is working), otherwise a message will appear on the display. (see; "10
Failures" on page 29 ).
Pay attention: make sure the cover can close properly in the
closing mechanism before you drive on the road with the JMB.
8 T H R OT T L E L E V E R
The throttle lever is carried out as a slide valve. This lever has variable positions
where you can set the number of revolutions and therefore also the working
pressure:
• Lever to the left : less revolutions and working pressure.
• Lever to the right : more revolutions and working pressure.
• Lever to the middle (option): engine speed for 'high temperature function' if
activated by the 'high temperature function' valve.
For info: the throttle lever is included at every standard configuration unless you
have the option automatic speed control!
9 WO R K I N G L I G H T / F L A S H I N G B E AC O N ( O P T I O N )
The working light is mounted on the side of the operating part of the trailer, the
flashing beacon is mounted on top of the protective cap.
Both lights can be turned on / off via the control panel display.
Note: do not turn on the working light / flashing
light while driving on public roads!
DISPLAY / FAILURES
In the middle on top of the display you can read the actual operating hours of
the machine and you can check if the antifreeze filling function is active.
An alarm notification icon is also visible when an alarm occurs (top right).
Centrally you can read the working pressure and the output temperature.
Left on top the engine speed setting will be displayed (100% is similar to
the max. adjusted pressure, in example below: 250 Bar. When the engine
speed setting is 50%, the working pressure will visualize 125 bar. At a high
temperature setting, the pressure indication will be noticeably lower).
Remark: if the high temperature valve is activated, the cleaner will go
automatically to the 'high temperature function' !
Right on top the setting temperature will be displayed.
Setting: 0°C= burner off & 1°C or more= stand- by temperature. Centrally (just
below the manometers), the temperature indication of the engine is displayed.
It can be that the actual temperature has a higher value than
the setting temperature, the burner will not work until the
actual temperature is lower than the setting temperature.
DiBO 25
E N
AC T I VAT I O N
Advertenties
Hoofdstukken
Inhoudsopgave
