Setting the microwave
Example: Microwave power output 600 W, cooking time
5 minutes.
Touch !.
1.
The appliance is ready to use. The maximum
microwave power output of 900 W will be displayed
as the default value on the display. You can change
this at any time.
Select the required power level using the settings
2.
area.
The microwave power output and a default cooking
time will be shown on the display.
Touch r.
3.
Set the required cooking time using the settings
4.
area.
Note: You can also set the cooking time first and
then the microwave power output.
Touch n.
5.
The cooking time counts down on the display. The
n LED lights up.
Notes
When you switch on the appliance, the highest
■
microwave power output always appears on the
display by default.
If you open the appliance door when the appliance
■
is in use, the fan may continue to run.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or
touch any field.
Changing the cooking time
Touch r until the + symbol is highlighted.
1.
Use the settings area to change the cooking time.
2.
After a few seconds, the change is applied.
Changing the microwave power output
Touch !.
1.
Select the required power level using the settings
2.
area.
Pausing the operation
Touch the n field or open the appliance door.
1.
The operation is suspended and the n LED flashes.
Close the appliance door.
2.
Touch the n field.
3.
The operation is continued and the n LED lights
up.
Cancelling operation
Touch #.
The appliance will stop heating and all the settings will
be cleared.
Note: The fan may continue to run after the appliance
has been paused or stopped.
Setting the microwave to combined
operation
Y ou can combine the microwave function with all types
S e t t i n g t h e m i c r o w a v e t o c o m b i n e d o p e r a t i o n
of heating. The appliance heats up and the microwave
is switched on at the same time. As a result, the food is
ready in a much shorter time.
Combination options
› Hot air
■
# Hot air grill
■
3 Pizza setting
■
$ Grill
■
Exceptions:
! Microwave setting 900 W
› Hot air 40 °C
Setting the combination mode
Example: Hot air › 190 ºC with microwave at 360 W,
17 minutes.
Touch !.
1.
The appliance is ready to use. The maximum
microwave power output of 900 W will be displayed
as the default value on the display. You can change
this at any time.
Set to 360 W using the settings area.
2.
The microwave power output and a default cooking
time will be shown on the display.
Touch 8.
3.
Microwave
en
47