Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
To access the electronic circuit board, pressure switch, manual reset thermostat, room heating element:
• Disconnect the plug.
• Detach the lower control panel by loosening the 4 screws inside the slots (see Fig. 34 page 32).
• Release the lower stainless steel plinth by completely removing the 3 top screws.
• Carefully remove the electronic circuit board holder, now all parts can be accessed for repair.
To access the 4 room fans:
• Unplug and disconnect the fume exhaust pipes.
• Pull the stove out of its built-in position.
• Loosen the 8 screws on the left and right hand side covers of the base (see Fig. 34 page 32).
• Detach the control panel and plinth (see above).
To access the ignition spark plug:LEGEND
• Loosen the 4 screws on the spark plug cover (see Fig. 35 page 33).
• Loosen the M4 grub screw holding the spark plug under the round head of the spark plug support.
FAMILY
Fig. 35 - Front view
LEGEND
Fig. 35 page 33
1
Igniter resistence
2
Igniter resistence cover
3
Oven frame
4
Oven lamp glass
5
Manual reset thermostat cap
6
Manual reset thermostat
7
Fume chamber
8
Fume fan
9
Hinge
10
Lamp support
11
Mother board tray
EN
33
Advertenties
Hoofdstukken
Inhoudsopgave
