10.15
REMOTE CONTROL (OPTIONAL)
The stove can be operated through a remote control. (Please install 12V N type battery)
11
SAFETY SYSTEM
11.1
INTRODUCTION
Safety devices are used to prevent and avoid the risk of damages to people, animales and objects.
It is forbidden to execute repearing by no authorized personnel otherwise the warranty and the manufacturer
liability fall.
Before of every intervention leave the fire completely extinguish till the cooling and always
disconnect the plug from the electric socket.
11.2
"ALAR NO RETE" ALARM
• "ALAR NO RETE": outage during ignition.
• The stove starts up the switching off phase up by activating the fume fan which for 15 minutes will arrange for
fume remainings expulsion.
• Reset the error with P4 key.
• Check the type of glitch as provided by ALARMS page 27.
• Clean the burning pot and start the stove up againg with P4 key.
11.3
"ALAR SOND" ALARM
To the exhaust fan is connected a probe which constantly controls the running temperature.
• "ALAR SOND": the probe is damaged or disconnected.
• The stove starts the switching off phase by activating the fume fan which for about 15 minutes will arrange for
fume remainings expulsion.
• Reset the error with P4 key.
• Check the type of glitch as provided by ALARMS page 27.
FAMILY
Fig. 19 - Remote control
LEGEND
Fig. 19 page 21
Button 1
Increase the desired temperature
Button 2
Decrease the desired temperature
Button 5
Decrease the power level from 5 to 1
Button 6
Increase the power level from 1 to 5
Buttons 1 and 6
Pressed together enable to turn the stove on and off
EN
21