Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All these operations must be planned in time with your Autorized Technical Assistance
Service.
• After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust.
• If the stove had been using continuously and intensely, the whole system (chimney included), must be
cleaned and checked more frequently.
• In case of replacement of damaged pieces please ask for the original spare part at the Autorized Retailer.
Before any movement let the fire inside the combustion chamber extinguish till the total
cooling and always disconnect the plug from the socket.
12.2
COMBUSTION CHAMBER CLEANING
Every month clean the combustion chamber.
Fig. 20 - Plate cooking removing
• Remove the cooking plate and pull out the components (see Fig. 20 page 23 and Fig. 21 page 23).
• Vacuum the ash accumulated inside the combustion chamber (see Fig. 22 page 23).
• After the cleaning the opposite operation is to repeat.
12.3
BURNING POT AND ASH TRAY CLEANING
The burning pot and ash tray cleaning must be executed at least every 2 days.
• Open the door.
Fig. 23 - Burning pot cleaning
• Extract the burning pot from its seat and empty it from the ash.
• Extract the ash tray and empty it from the ash.
• If necessary clean with a pointed object the holes obstructed by encrustations (see Fig. 23 page 23).
• Clean and drain away the burning pot box and ash tray box from ash which has accumulated in its inner (see
Fig. 24 page 23).
• Clean also the hole for pellet drop with a brush (see Fig. 25 page 23).
• The ash remains must be poured in a metal container with a sealed lid and this container must never get in
touch with combustible materials (for example put on a wooden floor), as the inner ash keeps the embers
firing for a long time.
• Only when the embers are off the ash coul be poured in the organic waste.
• Pay attention if the flame becomes red colured, if it is weak or if black smoke creates in the inner: in this case
FAMILY
Fig. 21 - Components removing
Fig. 24 - Burning pot box cleaning
Fig. 22 - Combustion chamber cleaning
Fig. 25 - Cleaning with a brush
23
EN
Advertenties
Hoofdstukken
Inhoudsopgave
