Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
13.2
PROBLEM SOLVING
EN
PROBLEM
CAUSE
Stove without power
supply
Burned board protection
fuse
Control display
Faulty control display
does not ignite
Faulty flat cable
Faulty electronic board
Empty tank
Auger blocked by a
foreign object (for
Pellet does
example nails)
not reach the
combustion
chamber
Auger geared motor out
of order
Check on the display if
there is an active alarm
("ALAR DEP", "ALAR SIC")
30
Before every testing and/or intervention of the Authorized Technician, the Autorized
Technician personally has the duty to verify that the parameters of the electronic board
meet those of the reference table you own.
In case of doubts regarding the running of the stove please contact ONLY the Autorized
Technician in order to avoid irreparable damages!
SOLUTION
Check if the plug is put in the socket.
Replace the board protection fuse (4A-250V).
Replace the control display.
Replace tha flat cable.
Replace the mother board.
Full the hopper.
Clean the auger.
Replace the geared motor.
Have the stove overhauled.
INTERVENTION
FAMILY
Advertenties
Hoofdstukken
Inhoudsopgave
