Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DISPLAY
UT04
EN
UT05
UT06
UT07
UT08
UT09
UT10
• To know the chronothermostat state check the parameter UT01: "DAY" (active), "OFF" (disactivated).
• UT01: it is useful to insert the weekly setting in "DAY" or to exclude it if in "OFF". Select the day of the week from
"DAY1" which correponds to Monday till "DAY7" which is Sunday. If the parameter UT01 is set with the current
day (for example DAY2 i.e. Tuesday), it is possible to select the day of the week to which arrange the ignition
PROGRAM 1 and/or PROGRAM 2. By keeping pressed P1 and P2 keys it is possible to select the desired value.
• UT05 - UT06: state the selected start and end time in PROGRAM1 for switching the stove on. Its setting is active
when UT01 parameter is programmed in weekly setting. When PROGRAM 1 is active, select the day of the
week with P1 key and activate or disactivate the switching on of the stove with P2 key.
• UT07: this parameter is active when parameter UT01 is set on weekly mode. When PROGRAM 1 is active, use
the P1 button to select the day of the week and the P2 button to activate/deactivate stove ignition.
• UT08 - UT09: state the selected start and end time in PROGRAM 2 for switching the stove on. Its setting is active
when UT01 parameter is set in weekly mode.
• UT10: this parameter is active when the parameter UT01 is set in weekly mode. When PROGRAM 2 is active,
with P1 key select the day of the week and with P2 key activate or disactivate the switching on of the stove.
10.13
FIRE EXTINGUISHING IN CASE OF FIRE
In case it would be necessary to extinguish the fire emitted by the stove or by the chimney flue, use a fire-
extinguisher or contact the firemen. DO NOT use water to extinguish the fire inside the burning pot.
10.14
PELLET SUPPLY
Fig. 17 - Wrong opening of the pellets bag
It is necessary to avoid to fill the hopper with the pellet when the stove is running.
• Do not get the bag of pellet in contact with hot stove surfaces.
• Do not empty the hopper with remaining fuels (unburnt pellet) from the burning pot coming from ignition
waster.
20
SETTING
Technical parameters (for technicians)
Ignition time PROGRAM 1
Switching off time PROGRAM 2
Days of the week selection with ignition at the morning
Ignition time PROGRAM 2
Switching off time PROGRAM 2
Days of the week selection with ignition in the afternoon
The pellet hopper must always be closed with its own lid.
Fig. 18 - Right opening of the pellets bag
FAMILY
Advertenties
Hoofdstukken
Inhoudsopgave
