Advertenties
Beschikbare talen
Beschikbare talen
1. No water.
The display
Red: on
2. Pump not primed.
shows
White: on
3. Setpoint not reachable
Blue: off
with the set RM value
BL
The display
Red: on
shows
White: on
1. Faulty pressure sensor. 1. Contact the assistance centre.
BP1
Blue: off
The display
Red: on
shows
White: on
1. Faulty pressure sensor. 1. Contact the assistance centre.
BP2
Blue: off
The display
Red: on
1. Excessive absorption.
shows
White: on
2. Pump blocked.
Blue: off
OC
The display
Red: on
1. Supply voltage too low.
shows
White: on
2. Excessive drop in
Blue: off
voltage on the line.
PB
1-2. Prime the pump and check whether
there is air in the pipe. Check whether the
suction or any filters are blocked.
3. Set a RM value that allows the setpoint
to be reached.
1. Fluid too dense. Do not use the pump
for fluids other than water.
2. Contact the assistance centre.
1. Check the presence of the correct
supply voltage.
2. Check the section of the power supply
cables.
11 - UPDATING THE FIRMWARE
Firmware version 3.xx can only be updated via App, for other versions the update can be
done via D-connect Box through wireless communication. For further information on the
latter type of update please refer to the D-Connect Box manual.
12 - DISPOSAL
This product or its parts must be disposed of in an environment-friendly manner and in
compliance with the local regulations concerning the environment; use public or private
local waste collection systems.
13 - GUARANTEE
Any use of faulty material or manufacturing defects of the appliance will be eliminated
during the guarantee period contemplated by the law in force in the country where the
product is purchased, by repair or replacement, as we decide.
The guarantee covers all substantial defects that can be assigned to manufacturing faults
or to the material used if the product has been used correctly, in accordance with the
instructions.
The guarantee is void in the following cases:
• attempts to repair the appliance,
• technical alterations to the appliance,
• use of non original spare parts,
• tampering.
• inappropriate use, for example industrial use.
Excluded from the guarantee:
• parts subject to rapid wear.
When making a request under guarantee, apply to an authorised technical assistance ser-
vice, presenting proof of purchase of the product.
GB
ENGLISH
68
Advertenties
