Grundfos MAGNA3 Installatie- En Bedieningsinstructies pagina 24
Verberg thumbnails
Zie ook voor MAGNA3:
- Installatie- en bedieningsinstructies (62 pagina's) ,
- Bedieningsinstructies (68 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
8. Control panel
Warning
At high liquid temperatures, the pump housing
may be so hot that only the control panel should
be touched to avoid burns.
Fig. 17 Control panel
Button
Function
Goes to the "Home" menu.
Returns to the previous action.
Navigates between main menus, displays and
digits.
When the menu is changed, the display will always
show the top display of the new menu.
Navigates between submenus.
Saves changed values, resets alarms and expands
the value field.
9. Menu structure
The pump incorporates a start-up guide which is started at the
first start-up. After the start-up guide, the four main menus will
appear in the display. See section 5. First start-up.
1. Home
This menu shows up to four user-defined parameters with
shortcuts or a graphical illustration of a Q/H performance curve.
See section 10. "Home" menu.
2. Status
This menu shows the status of the pump and system as well as
warnings and alarms. See section 11. "Status" menu.
Note
No settings can be made in this menu.
3. Settings
This menu gives access to all setting parameters. A detailed
setting of the pump can be made in this menu.
See section 12. "Settings" menu.
4. Assist
This menu enables assisted pump setup, provides a short
description of the control modes and offers fault advice.
See section 13. "Assist" menu.
24
10. "Home" menu
Navigation
Home
Press
to go to the "Home" menu.
"Home" menu (factory setting)
•
Shortcut to control mode settings
•
Shortcut to setpoint settings
Flow rate
•
Head.
•
Navigate in the display with
shortcuts with
or
.
The "Home" display can be defined by the user.
See section 12.9.6 Define Home display.
11. "Status" menu
Navigation
Home > Status
Press
and go to the "Status" menu with
"Status" menu
This menu offers the following status information:
Operating status
•
Pump performance
•
Power and energy consumption
•
Warning and alarm
•
Heat energy meter
•
Work log
•
Fitted modules
•
Date and time
•
Pump identification
•
Multi-pump system.
•
Navigate between submenus with
or
and change between the two
.
or
.
Advertenties
