Grundfos MAGNA3 Installatie- En Bedieningsinstructies pagina 21

Verberg thumbnails Zie ook voor MAGNA3:

Advertenties

Beschikbare talen

5. First start-up

Do not start the pump until the system has been filled with liquid

and vented. Furthermore, the required minimum inlet pressure

must be available at the pump inlet. See section 18. Technical

The system cannot be vented through the pump. The pump is

self-venting.

Switch on the power supply to the pump.

Note: When switched on, the pump will start in

after approx. 5 seconds.

Pump display at first start-up.

After a few seconds, the pump display will change to the

start-up guide.

The start-up guide will guide you through the general

settings of the pump, such as language, date and time.

If the buttons on the pump control panel are not touched

for 15 minutes, the display will go into sleep mode. When

a button is touched, the "Home" display will appear.

When the general settings have been made, select the

desired control mode or let the pump run in AUTO

For additional settings, see section 6. Settings.

Illustration

Advertenties