Inhoudsopgave
Advertenties
10
9. Do not use outdoors.
10. Do not let cord hang over edge of table or
counter.
11. CAUTION! This appliance is not intended
for use by persons (including children)
with reduced physical, sensory, or mental
capabilities, or lack of experience and
knowledge, unless they are closely
supervised and instructed concerning use of
the appliance by a person responsable for
their safety. Close supervision is necessary
when appliance is used by or near children.
Children should be supervised to ensure
that they do not play with this appliance.
This appliance is not to be used by children.
Keep the appliance and its cable out of
reach of children.
Save these instructions
This appliance has a polarized plug (one
blade is wide than other). To reduce the risk of
electrical shock, the plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
modify the plug in any way.
The presence of a crossed off wheelie-
binindicates that, within the European
Union, the product is subject to separate
collection at the end of its useful life.
These products must not be disposed of
together with regular municipal waste.
Material included in
the box
• Machine body
• Crank
• Clamp
• Instruction manual
• Slide (Atlas slide only)
• Pastadrive motor and
power cord (Atlasmotor and
Ampiamotor only)
How to prepare the
machine for use
Fix the machine to the work
surface by inserting the clamp
in the appropriate hole (fig. 1 )
insert the crank and always turn it
clockwise (fig. 2 ).
Inserting the slide
If you have Atlas Slide, insert the
slide in the appropriate guides
(fig. 3 ).
Connect the motor
If you have Atlasmotor or
Ampiamotor connect the motor on
the side of the machine as shown
in figure 4 .
If you are using the machine for
the first time, clean the rollers
with a damp cloth and then pass a
little dough between them which
will then be eliminated.
Pull the regulator outwards and
turn it to position No. 0 (fig. 5 ).
Once the dough is prepared, pass
it several times in the position
No. 0, folding the sheet in half
and flouring it at each step, until
obtaining a regular and compact
shape (fig. 6 ).
Then pass the sheet once for each
number until reaching the desired
thickness.
Once the desired sheet thickness
is obtained, cut it into pieces
about 25 cm long and lightly flour
it on both sides.
ENGLISH
Move the crank into the hole of
the cutting rollers and pass the
sheet to obtain the chosen pasta
format.
Care and
maintenance
Do not wash the machine and
accessories with water or in the
dishwasher.
Clean with a cloth or brush
(fig. 7 ). The combs and scrapers
under the cutting rollers are
removable, for enhanced cleaning.
To clean the combs and scrapers:
• Press the rod downwards and
push it sideways to remove it
(fig. 8-9 ).
• Flip the machine over, making
sure to hold the part under
the rollers with your hand: the
combs and/or scrapers will be
removed.
To facilitate removal of the
scrapers under the pasta sheet
rollers, it is advisable to turn
the regulator to position 3.
• Clean using a brush or a cloth.
The combs and scrapers can
be washed with cold water, or
with a disinfectant for surfaces
compatible for food contact
(preferably HACCP certified).
Dry the components completely
before reinserting them. Do not
use products other than those
recommended.
• To reinsert everything, repeat
the above operations in reverse
In case of squeaking, insert a few
drops of Vaseline oil suitable for
food contact at the ends of the
rollers (fig. 10 ).
11
Advertenties
Inhoudsopgave
