DAB E.Sybox Gebruiks- En Onderhoudsaanwijzing pagina 107

Verberg thumbnails Zie ook voor E.Sybox:

Advertenties

Beschikbare talen

Use the key "1" for the orientation of the

interface panel as described in par 2.2.2.

If the key is lost or damaged, the operation

can be done using a standard 2mm allen

Once the 2 plastic keys have been separat-

ed they can be used by inserting "2" in one

of the holes "B" in key "3": whichever hole is

most convenient, depending on the opera-

tion. At this point you obtain a multifunction

cross key, with a use corresponding to each

of the 4 ends.

To use the cross key you must put the unused key "1" away in

a safe place so that it does not get lost, or else put it back in its

seat inside key "3" at the end of operations.

Use of end "C":

this is practically a straight tip screwdriver of the correct size for manoeu-

vring the caps of the main connections of the system (1" and 1"1/4). To

be used at the first installation

to remove the caps from the

mouths on which you want to

connect the system; for the

filling operation in the case of

horizontal installation; to access

the non-return valve, ... If the

key is lost or damaged, the same

operations can be performed

using a straight tip screwdriver of

a suitable size.

Use of end "D":

hexagonal socket head suitable for

removing the cap to perform filling in the

case of vertical installation. If the key is

lost or damaged, the same.

Advertenties

E.sybox 30/50