DAB E.Sybox Gebruiks- En Onderhoudsaanwijzing pagina 106

Verberg thumbnails Zie ook voor E.Sybox:

Advertenties

Beschikbare talen

In the DAB catalogue there is a Kit for the integrated creation of a booster

set of 2 systems. The booster made with the DAB kit appears as in Fig.21

9.4.12 - Wireless Control

As described in par. 9.4.3, the device can be connected to other devices

by means of the proprietary wireless channel. There is therefore the pos-

sibility of controlling particular operations of the system through signals

received in remote mode: for example, depending on a tank level sup-

plied by a float it is possible to order it to be filled; with the signal arriving

from a timer it is possible to vary the setpoint from SP to P1 to supply

These signals entering or leaving the system are managed by a control

unit that can be bought separately from the DAB catalogue.

10. MAINTENANCE

The system requires no routine maintenance operations.

However, below are the instructions for performing the special mainte-

nance operations that may be necessary in particular cases (e.g. empty-

ing the system to put it away during a period of inactivity).

10.1 - Accessory tool

With the product DAB supplies an accessory tool that is useful for carry-

ing out the operations contemplated on the system during installation and

any special maintenance operations.

The tool is housed in the technical compartment. It is composed of 3

Key "1" is in turn inserted in the end "D" of key "3". At the first use you

must separate the 2 plastic keys "2" and "3", which are supplied joined by

a bridge (Fig.22 – A):

Disconnect the power supply before starting any work on the

1 - metal key with a hexagonal section (Fig.22 – 1);

2 - flat plastic key (Fig.22 – 2);

3 - cylindrical plastic key (Fig.22 – 3).

break the bridge "A", taking care to remove the cutting residue

from the 2 keys so as not to leave any sharp bits that could

cause injuries.

Advertenties

E.sybox 30/50