It results that, with SP = 3.0 bar, the system is able to ensure a constant
pressure at the users that require flow rates respectively between 0 and
85 litres/minute for e.sybox and between 0 and to for e.sybox 30/50. For
higher flow rates the system works according to the characteristic curve of
the electropump at maximum rotation speed. For flow rates lower than the
limits described above, as well as ensuring constant pressure, the system
reduces the absorbed power and therefore the energy consumption.
The above performances are to be considered measured at
ambient temperature and water at about 20°C, during the first
10 minutes of motor operation, with water level at suction at a
depth of no more than 1 metre
As the suction depth increases, the performance of the electro-
pump decreases.
1.4 Technical characteristics
Voltage
Frequency
ELECTRIC POWER
SUPPLY
Maximum current
Maximum power
CONSTRUCTION
CHARACTERISTICS
HYDRAULIC
PERFORMANCE
Figura 6
WORKING
CONDITIONS
FUNCTIONALITY
AND
PROTECTIONS
e.sybox
e.sybox 30/50
1 x 220/240 ~ VAC
2- INSTALLATION
50/60 Hz
10 A
6,8 A
1550 W
900 W
Overall dimensions
Empty weight (excluding
packaging)
Protection class
Motor insulation class
Maximum head
Maximum flow rate
Priming
Maximum working
pressure
Liquid temperature max
Environment temperature
max
Storage environment
temperature
Constant pressure
Wireless communication
Protection against dry running
Antifreeze protection
Anticycling protection
Motor overload protection
Protection against abnormal supply voltages
Protection against excess temperature
The system is designed for indoor use: do not install the system
outdoors and/or directly exposed to atmospheric agents.
GB
ENGLISH
565x265x352 mm without
feet
24,8 kg
22,5 kg
IP x4
F
65 m
50 m
120 l/min
85 l/min
<5min at 8m
<5min a 7m
8 bar
40 °C
50 °C
-10÷60 °C
64