Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Operation Instructions
FloorLine-i
1
3
4
2
5
1. Back rest down
2. Hi-lo down
3. Knee break down
4. Auto contour down
5. Trendelenburg tilt
6. Back rest up
7. Hi-lo up
8. Knee break up
9. Auto contour up
10. Reverse Trendelenburg tilt
The Backlit Handset is directly connected to the
control box, via a curly cord. Used predominantly
by the patient, each button has a Raise (Left Side)
and a Lower (Right Side) function that adjusts all
mattress platform positions.
• All the buttons (labelled below) should be
explained to the patient.
• When the bed or individual sections of
the bed have reached the desired position
release the button to stop movement.
• Movement in the opposite direction will be
resumed when the appropriate button is
pressed.
• When maximum raised or lowered positions
24
6
8
9
7
10
of mattress base or backrest are reached,
a built-in limit switch will automatically
override the handset button and movement
will stop.
• When not in use, the handset is designed to
clip over the mattress retainers on the sides
of the mattress platform or over the Head &
Foot Boards.
NOTE: If a problem occurs with the handset,
confirm that the correct Initialisation Process
was completed during Bed Assembly.
9.6 Lockout (this information is only for
the FloorLine-i bed since the lockout for
FloorLine-i Plus is controlled through the
attendant control keypad.
A small blue plastic 'lock out key' is included, to
lock any function on the bed:
1. Insert the key into the two holes in the button
you wish to lock out
2. Gently turn the key from the 'green' - 12
o'clock position toward the unlock or
lock symbols at 11 or 1 o'clock positions
respectively.
Gently turn the lockout key in the holes, or key
tabs may break.
ENG
www.humancaregroup.com
Advertenties
Inhoudsopgave
