Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Operation Instructions
Provided the above has been complied
with, the bed may now be put into service.
1. Confirm that the wall power switch is OFF (in
countries where this applicable).
2. Plug the mains supply cable into the wall
power-point/socket/outlet.
3. Turn ON the wall switch at the power-point,
(country-determined).
This bed should be connected to the mains
power supply and remain switched on at all
times, to guarantee that the bed's battery
backup is adequately charged and ready for
operation at any time.
4. Check that the bed has been initialised, is fully
functioning and in perfect working order
5. Confirm that the bed has been cleaned and
disinfected.
9.3 Putting the bed back into service
1. Read and follow the previous two sections
(reading the Instruction Manual, attending to
all safety issues & operation usage).
2. Conduct a complete Maintenance Check for
safe bed functioning and perfect working
order. Especially check for the safe routing
of all cables/cords and clearance for all bed
adjustments.
3. Verify wheel castors are locked.
4. Confirm mains wall power is OFF.
5. Recheck the mains cord/plug for damage
while out of use, push into wall socket.
6. Turn ON the wall switch (in countries where
this is applicable) and leave permanently on,
for charging back-up battery.
7. Confirm bed is cleaned and disinfected.
www.humancaregroup.com
9.4 The main functions of the bed
The mattress platform has four main panels that
can be adjusted into different positions.
9.5 Backlit handset
FloorLine-i Plus
6
7
8
9
10
11
1. Back rest down
2. Hi-lo down
3. Knee break down
4. Auto contour down
5. Trendelenburg tilt
6. Back rest up
7. Hi-lo up
8. Knee break up
9. Auto contour up
10. Reverse Trendelenburg tilt
11. Under bed light on/off
ENG
1
2
3
4
5
23
Advertenties
Inhoudsopgave
