6. Optional Accessories
Intravenous (IV) Pole and Fitting an IV Pole
Adjustable IV Poles can be fitted to both ends of
the bed.
It is important to only use Human Care IV
Poles, as any incompatible IV poles could cause
damage and/or injury. The safe working load of
the IV Pole is 7kg (15lb).
The bed is fitted with four brackets for IV Poles.
They are located at each corner of the bed,
behind the head and footboards.
Note: Only Human Care IV Poles will fit
the beds.
Care Assist Rails
Designed to assist patients safely in and out of
bed, it is ergonomically designed and low profile
to avoid feeling restricted or restrained.
12
Picture 3
Picture 4
Side Rails and how to fit side rails
Human Care recommends against the use of
side rails however Human Care is aware that in
some cases, side rails can be expected for care.
Only authentic Human Care side rails should be
fitted to a Human Care true floor-level bed, as
any incompatible side rails may cause damage
and/or injury.
1. Raise the bed to full height. Install 4 x bed
brackets using existing bolts on mattress
platform rails.
2. Loosen hand wheel on side rail brackets and
fit to bed.
3. Ensure side rail brackets are seated correctly
in bed brackets.
4. Tighten side rail hand wheels and test the side
rails for correct function.
5. Reverse above steps to remove side rails
and/or injury.
Be aware of pinching risk while
o
folding down the side rail.
Wall Bumper Bar:
The Wall Bumper Bar protects the head end of
the bed. This bumper bar is fitted to the lower
cross beam between the castors.
Oxygen Bottle Holder
A bracket holds a 'C-size' Oxygen Bottle
conveniently to the FloorLine-i Plus and
FloorLine-i Bed.
ENG
www.humancaregroup.com